CUBE Logo RGB Positive

Plank grating Oyster

F972000300

Steel 240 YP

Punched hole mesh gratings CUBE® has a high strength-to-weight ratio which means that strength is maintained while weight is reduced. The greater the span, the lower is the weight – in relation to pressure-locked mesh gratings. The CUBE® grating can be produced in three design variants depending on how much slip resistance is needed. CUBE® mesh gratings are recommended in most constructions and industries where high air- or liquid flow are required.

CUBE-Plank-grating-B-CUBE-Oyster-Steel-240-YP-F972000300-1.jpg
Cube Plank Grating Length Equals Span Direction

Specifications

  • PTV guidelines: 36+ Low Slip Potential acc. to BS 7976
  • Dry PTV average: 104 multi-directional acc. to BS 7976
  • Wet PTV average: 70 multi-directional acc. to BS 7976
  • Slip resistance: R13 = slope >35° acc. to DIN 51130
  • Free area: 50-56 %
  • Upward grip holes: Oyster - serrated dia 6,5 mm
  • Downward drainage holes: 34x34 mm
  • C-C grid: 43,5 x 43,5 mm
  • Load capacity: 1,5 kN / 200 x 200 mm acc. to EN ISO 14122
  • Ball proof: 35 mm in accordance with BS 4592
  • Fire resistance: Critical temperature 550 °C
Show all specifications

The product is also available in the material(s) below.

Designed for simplicity & efficiency

Cut-outs

You can easily make cut-outs on-site or let us help you customise your project

Load capacity

CUBE gratings, panels and stair treads comply to the European Industrial standard EN ISO 14122-2 for a concentrated load of min. 1.5 kN on 200x200 mm and to BS 4592 Part 0: 2006 +A1: 2012.

Accessories

We supply various fixing clamps and kick flats for platforms and walkways.

Slip-resistant

The CUBE® (oyster) punched hole mesh gratings are tested according to DIN 51130 and BS 7976-2 2002 for slip resistance.

Low weight

Punched hole mesh grating CUBE® has very high strength compared to the weight ratio due to the unique cold-formed design.

Quick and cost-efficient to install

The CUBE gratings and stair treads are quick and easy to install.

Ball proof

The CUBE® gratings are 35 mm ball-proof according to EN ISO 14122-2 and comply to BS 4592 Part 0: 2006 +A1: 2012

Standard dimensions

Get security and modern design at competitive prices with PcP CUBE.

Length (mm) Width (mm) Height (mm) Thickness (mm) Finish Item no.  
600 1000 42 2 Hot-dip galvanised EN 1461 F004000101 STEP
800 1000 42 2 Hot-dip galvanised EN 1461 F004010101 STEP
1000 1000 42 2 Hot-dip galvanised EN 1461 F004020101 STEP
Item no.  
F004000101 STEP
F004010101 STEP
F004020101 STEP

Tailormade solutions or standard products?

Interested in advice to find the right product or tailormade solution? Contact us and one of our experts will contact you.

Standard or bespoke open steel flooring solution?

Contact us!

Our experienced team of experts are ready to advice you about regulations and help you find the right product or solution for your project.